Services for colour coding a warehouse floor area

Color in a painting is playing an increasingly important role in the industry. Systems have been perfected that protect workers and allow them to work in conditions of greater safety and better visibility. Modern workplaces, however safe they may be, are fraught with hazards. Forklifts energized equipment, loading docks, busy warehouses, and other hazards can make it difficult for employees to work and move safely throughout a facility. When choosing colors for an industry, the following factors must be taken into account for the colour coding a warehouse floor area:

Moving parts, such as machinery, must be painted with colors that contrast with the stationary bases, thus reducing eye fatigue, relaxing the nervous system, and more protection against personal accidents. Lighting must be a primary necessity for a colour coding a warehouse floor area. It is important that the background does not offer too much contrast in terms of the brilliance of the color, with the machinery and the material. A very strong contrast causes discomfort in the eyes of those who have to work there. At the same time, the background colors should not be so striking that they make the worker’s eyes move away from their machines.

Generally, the ceiling is a large area that can be used advantageously to reflect the maximum amount of light that falls on its surface. The study of the reflector power table shows that white reflects more light than any other color. Taking everything into consideration, the odds will be that the white color is preferred for the blank sky. However, we must consider what kind of work is done in the industry. Suppose, for example, that the workers have to adopt a caterpillar’s point of view to see the houses and that they have to apply their ability to perfect the lower surface of the rooms of an airplane. That would mean that the ceiling would come to constitute the background for your specific task and in that case, a white ceiling could be a nuisance.

Now, if the work areas on the machines for the colour coding a warehouse floor area receive an adequate amount of direct light and the clear sky is something that is throwing over the eye a confused mass of beams, crossbars, wires and pipes, all the parts of the sky will have to be painted rasa with a cold color, to reduce to the minimum the sensation of disorder and confusion that many industrial structures and facilities give. In professional cleaning, it is very important to maintain a correct hygiene that the materials used in one area are not used in another. Can you imagine that the person cleaning your house used the same cloth for the toilet as for the kitchen table?

This is an extreme example but then why use the same mop in the bathroom and in the bedroom? Although they are washed between one use and another, it is best to avoid crossing cleaning materials. To avoid crossing materials, the best option is to use a color code. In industrial/commercial cleaning it is mandatory to use a color code to avoid what is called “cross-contamination”, but this obligation does not affect domestic cleaning. Although the regulations require the creation of a color code for commercial cleaning, curiously there is no defined color standard, that is, there is no specific color for each zone. But the custom has established some standard colors for certain uses in industry, such as red for areas of high bacteriological risk and green for areas of food processing.

At colour coding a warehouse floor area we think that this good custom of the color code should also be implemented in the houses and make a distinction of colors by zones. Here we propose a possible division to make in our homes:

  • To that end, floor marking is an essential component of a safe workplace. The lines, stripes, and dots lining facility floors throughout the country that can create order, keep employees away from dangerous areas, and mitigate hazards wherever possible.

Here’s a look at what we have to say about floor marking, and how it can improve efficiency and increase safety in your facility.

Floor Marking Color Standards Guide

With the right colors in the right places like colour coding a warehouse floor area, you can easily keep workers on the right path and identify equipment, storage areas, hazardous areas, forklift traffic and more. Use as few colors as possible to make it easier for employees to remember the meaning of each color and reduce the number of floor marking products you need.

Mitigating Hazards with colour coding a warehouse floor area:

The organization with colour coding a warehouse floor area knows the floor marking basics, how can it protect employees from hazards? Here’s a quick rundown:

  • Separate workers from machines and moving equipment: Use floor marking to designate paths that protect pedestrians from forklifts, electrical panels, heavy machinery, and other hazards.
  • Warn of hazardous areas: Keep employees safe on loading docks around dangerous equipment and around areas with exposed edges.
  • Provide instruction: Let employees know where to stand (or where to avoid) when operating heavy machinery and other equipment.
  • Improve forklift safety: Forklifts are fraught with hazards. Floor marking can establish pedestrian-only paths, keep employees away from imbalanced or unsafe loads, and establish traffic controls for drivers. Learn more about forklift safety tips.
  • Keep employees safe in low-light conditions: Phosphorescent floor marking can help employees find exits and equipment in emergencies and other low-light situations.

This color guide will help for colour coding a warehouse floor area be consistent in your workplace:

Yellow : Aisle ways, traffic lanes, and work cells.

White : Equipment and fixtures not otherwise color coded (workstations, carts, floor stand displays, racks, etc.)

Blue | Green | Black : Materials and components, including raw materials, work-in-progress and finished goods

Orange : Materials or products held for inspection

Red : Defects, scrap, rework and red tag areas

Photo Luminescent : Steps and perimeter demarcation to identify egress routes in a lights-out emergency

Red & White Stripe : Areas to be kept clear for safety/compliance reasons

Black & White Stripe : Areas to be kept clear for operational purposes

Yellow & Black Stripe : Areas that may expose employees to physical or health hazards